Process Instruments

Product Details:

The transmitters of the 985V series are used to measure volume flow or flow velocity and pressure. A jumper enables switching between volume flow or flow velocity and pressure measurement.

Application:

• HVAC systems
• Velocity meansurement in duct
• ID / FD Fan - Flow measurement 

• Setting ranges:
  Depending on type between 0 to 100 mbar
• Temperature range:
  Working and storage temperature from -20°C to +70°C
• Process connection:
  Hose connection with 4 / 6 mm outer diameter
• Supply voltage:
  18 to 30 VAC / VDC
• Output signal(3-wire):
  0 - 10 V
  4 - 20 mA
• Electrical connection:
  Plug-in terminals for wires and strands up to 1.5 mm2 or
  circular connectors M12 / 4-pole
• Protection class:
  IP65 acc. to EN 60529

Additional Information:

• Delivery Time: ready Available stock
• Packaging Details: Box packing

Product Details:

The differential pressure gauges 990 Display are for air and non-aggressive gases and will be used to measure differential pressure, overpressure and vacuum. They offer one adjustable pressure range and two output signals, which can be selected in the menu. The type 990M has a manual zero offset calibration, the type 990A has an automatic zero offset calibration. Monitoring of air and non-aggressive gases.

Features:

• Min. pressure range 0-25 Pascal and max. pressure up to 0-2.5 bar (Other as per customer requirement)
• Adjustable pressure range To adapt the instrument to the application, the factory-set pressure range can be modified in the menu in a range from 100% to 50% of its full scale value.
• Switchable output signal 0-10V or 4-20mA, easy to switch in the menu. Further values on request.
• Switchable pressure units The instrument offers three different pressure units to show in the display, which can be selected in the menu. Factory setting is Pascal (kPa), which can be changed to mmWC, mbar or inWC.

Applications:
Monitoring of gaseous, non-combustible and non-aggressive Media. Possible usage areas are: 

• Building automation and air conditioning systems
• Overpressure measurement in clean rooms and laboratories 
• Measurement of constant pressure in VAV applications
• Dynamic filter and ventilator monitoring
• Bag-filter (Dust collector) application
• AHU''s application

Request
Callback

Additional Information:

• Delivery Time: Ready stock
• Packaging Details: Box packing

Product Details:

Intended use:

The level indicator observes the filling level as a limit switch in silos and vessels. It can be used as a full and empty indicator for dusty and powdery, granulated and grainy bulk goods with a maximum grain size up to 100 mm and with a bulk density of 0.3 to 3 t/m3

.

Product Details:

Reinforced membrane level indicator. Is to be used to control normally the minimum level of bulk solids in silos or vessels and with high density bulk goods or with a hight abrasion to the membrane due to the product.

These controllers consist of a switch actuated by a membrane and it is recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with an easy flow and a bulk density from 0.3 to 2.5 t/m3.

Additional Information:

• Delivery Time: From Ex stock

Product Details:

Specifications:

• Output Signal : Current : 4...20mA
• Pressure Range 1,2.5,4,6,10,16,25,40,60,100,160,250,400 and
• 600 absolute bars 1,2.5,4,6,10,16,25,40,60 relative bars
• Operating Temperature : –30...+80ºC
• Span & Full Scale Adjustment : ±10%
• Accuracy (linearity, Hysteresis & Repeatability) : £ ± 0.4% F.S
• Process Connection :¼" BSP male
• Electrical Connection : 3/4 -pole faston male connector + DIN 46350 female connector (outlet)

 

 

Product Details:

Features :

• Adjustable temperature offset value-ON / OFF Temperature control
• Selectable Heating or Cooling function-Relay or SSR Driver output

Other details:

• PTC: PTC 1000 (1000W@25ºC)
• Thermocouple (TC): J, K (IEC 584.1) (ITS90)
• Thermo-resistance (RTD): 2-wire PT 100, PT 1000 (IEC 751) (ITS90)
• Accuracy: ± 1% of scale-Cold Junction

Control Output:

• Relay (5A@250V~ at resistive load) or Operating Temperature: 0-50ºC
• Humidity : 0-90%RH (non-condensing)

Product Details:

Pressure transmitter for measuring ± and asymmetric pressure differentials in standard applications.

 

Special features:

• Measurement ranges (also ±) others available upon request 50/100/200/500 Pa & 1/2.5/5/10 kPa
• Robust ABS housing with protection class IP 67 for mounting on top-hat rails or a wall (with just 2 screws)
• Comes with either a defined measurement range or with the option of alternating between 4 measurement ranges
• Adjustable output signal 0/2-10 V or 0/4-20 mA
• Adjustable output signal attenuation of up to 10 s
• LC display (optional)
• Can be calibrated
• Zero-point calibration via an external voltage signal lowers maintenance requirements.
• An adjustable limit switch allows users to connect equipment such as fans or signalling devices, and eliminates additional switching processes (optional).

Applications: 
Monitoring of gaseous, non-combustible and non-aggressive Media. Possible usage areas are: 

• Building automation and air conditioning systems
• Pharma machine application for Differential pressure & Air flow measurement 
• Textile machine application - Carding, Draframe, Ringframe, Blowroom
• Bag-filter (Dust collector) application
• Draft pressure measurement in furnace, blower & boiler 

Other Details:

• This pressure transmitter is particularly well suited for monitoring filters and pressures in HVAC (heating, ventilation and air conditioning) applications.

• DIP switches allow users to configure the output signal and switchable measurement ranges (optional). Settings provide an option for conversion to a root-extracted output signal (displayed as a % of the maximum output value). An internal button is also available for performing a zero-point correction or fine-tuning the end value.

• An optional display allows users to read the measured value directly on site in Pa or kPa. With an optional time constant (up to 10s), the instrument can produce an attenuated output signal, even under unstable pressure conditions. An optional two-wire version of the device is also available for reducing wiring complexity. In addition to simple wall-mounting with just 2 screws, the PS 17 is also suitable for mounting on top-hat rails.

• The device is also available with an optional ISO-compliant factory calibration certificate or a DAkkS-accredited calibration certificate.

Request
Callback

Additional Information:

• Delivery Time: 4-6 working weeks
• Packaging Details: Box packing

Product Details:

Other Details:

• Ceramic sensing element
• Shock Resistant and Vibration Resistant
• High Accuracy, High Stability
• Wide Operating Temp. Range of -40 to 125 Degree C
• Output Signal: 4-20 mA

Specifications:

• Measuring Range: Refer Table-A
• Overload Pressure: 1.5 Times the rated value
• Output Signal: 4 to 20mA
• Supply Voltage 9 to 30 V DC
• Accuracy: + / - 0.5 % F.S.
• Long-term: Stability: +/- 0.2 % FS/ Year
• Overload Resistance 50 (V -12 )W
• Temp. Coefficient: 1 x 0.0001 Degree C. F.S.
• Response Time: 10 ms

Additional Information:

• Item Code: EQ-PT1000

Product Details:

This Micro Controller Based Instrument is basically a two channel
process controller, which accepts two 4~20mA current inputs and
display their corresponding process values of RH and Temperature
It has two individual control set points, for each channel with a variable
hysterisisI.n the normal mode, the user can set the control set point for
both channelsa nd their correspondinhgy sterisis.
SPECIFICATIONS:
Display Type 3½ Digit Red LED
Range 0 to 100% RH ; 0 to 110°C (other range optional)
Accuracy ± 0.25%
Resolution 0.1% RH 0.1°C
Input 4~20mA inputs ×2 channels for RH and Temperature
Set Points Dual control set points for RH and Temperature
with relay output
Hysterisis 10% of Range
Control Action Set able for Heating / Cooling logic.
Auxiliary Power Supply 24V DC
Memory EEPROM memory with 100 years memory retention
Supply 230V AC, ± 10%, 50Hz.
Cutout Size 92mm(W) × 92mm(H)
Overall Size 96mm(W) × 96mm(H) × 115mm(D)

Product Details:

General description :
The differential pressure transmitters of the 985 series are used to measure differential pressure, overpressure and vacuum. They provide up to 8 pressure ranges and 2 output signals, which are easily selectable by jumper or rotary selector switch.
Applications :
Monitoring of gaseous, non-combustible and non-aggressive media. Possible usage areas are: · Building automation and air conditioning systems · Overpressure measurement in clean rooms and laboratories · Measurement of constant pressure in VAV applications · Dynamic filter and ventilator monitoring

Additional Information:

• Delivery Time: Ex Stock
• Packaging Details: Box Packing

Product Details:

Specification:

• Measuring Range: 0.1 to 1000 Bar
• Accuracy : £ ± 0.5% F.S (including Linearity, Repeatability & Hysterics)
• Long Term Stability: ± 0.2% f.s
• Output: 4 ~ 20mA
• Over Pressure: 2.5 full times scale
• Span & Full Scale Adjustment: ± 10%
• Response Time: 10m/Sec

Product Details:

The differential pressure transmitters of the 982R series are used to measure differential pressure, overpressure and vacuum. They provide one adjustable pressure range and one output signal. Monitoring of gaseous, non-combustible and non-aggressive media.

The end of the pressure range can be reduced to 50% of its factory set full scale value simply by the use of a push-button.

Applications:

• Building automation, air conditioning and clean room technology
• Valve and flap control
• Filter, fan and blower monitoring
• Control of air flows
• Medical equipments

Features:

• Adjustable pressure range: The end of the pressure range can be reduced to 50% of its factory set full scale value simply by the use of a push-button.

• Output signal:0-10 V or 4-20 mA. Other signals on request.

• Easy offset calibration: The output signal can be calibrated to zero by pressing the push-button (pressure transmitter must be depressurised).

• Configurable response time: The response time of the output signal can be configured using a jumper. If the jumper is in place the response time is slow (factory setting), which is useful for suppressing brief pressure peaks. If the application requires a fast response time the jumper must be removed.

• Volume flow measurement (optional): The shape of the output signal can be programmed to square root by the factory.

• Reset: The transmitter can be reset to its factory setting, just by pressing the push-button for >10 sec.

• Measuring method: Piezoresistive pressure transducer

 

Request
Callback

Additional Information:

• Item Code: 982R
• Delivery Time: 4-5 working weeks
• Packaging Details: OEM box packing

Product Details:

Compact differential pressure transmitter for positive or negative differential pressures in basic applications.

Special features:

• Suitable for top-hat rail mountingand wall surface installation 
• Selectable output signal 0/2-10 V, 0/4-20 mA or 0-5 V
• Selectable attenuation of the output signal of up to 4 s (optional)
• Display (optional)
• Can be calibrated
• Zero-point calibration via an external signal reduces maintenance costs
• The adjustable limit switch permits the connection of, e.g. ventilators or signalling devices, and saves additional wiring (optional)

Applications: 
Monitoring of gaseous, non-combustible and non-aggressive Media. Possible usage areas are: 

• Building automation and air conditioning systems
• Pharma machine application for Air flow measurement 
• Textile machine application - Carding, Draframe, Ringframe, Blowroom
• Bag-filter (Dust collector) application
• Draft pressure measurement in furnace, blower & boiler 
• This compact differential pressure transmitter is particularly suited to filter and pressure monitoring applications in the heating, air-conditioning and ventilation industries. An optional display allows measurement values to be read directly on-site in Pa or kPa. An optional time constant (up to 4s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. To reduce wiring costs, the instrument is also available in a version with two-wire technology (optional). The PS27 can be mounted either on a wall or on top-hat rails.
• The instrument is available with an ISO factory calibration or DAkkS-accredited calibration certificate (optional).

Request
Callback

Additional Information:

• Delivery Time: Ready stock
• Packaging Details: Box packing

Product Details:

Product Details:

Field adjustable, multi-range differential pressure transmitters for air. DPT-R8 series differential pressure transmitters are engineered for building automation in the HVAC/R industry. The most technologically advanced transmitters on the market measuring static and differential pressure, with field selectable units, range and output, all in a single device. 

Measuring ranges:

(1.) 250: -150 to +150/ -100 to +100/ -50 to +50/ -25 to +25/ 0 to 25/ 0 to 50/ 0 to 100/ 0 to 250 Pascal
(2.) 2500: -100 to +100/ 0 to 100/ 0 to 250/ 0 to 500/ 0 to 1000/ 0 to 1500/ 0 to 2000/ 0 to 2500 Pascal
(3.) 7000: 0 to 1000/0 to 1500/0 to 2000/0 to 2500/0 to 3000/0 to 4000/0 to 5000/0 to 7000 Pascal

DPT-R8 series devices include: 

• Multiple measurement units, field selectable via jumper, including: inWC, mmWC, Pa, mbar.
• 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper.
• Proportional output options including: voltage (0–10 V) and current (4–20 mA).

DPT-R8 series device options offer:

• AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy
• Backlit display
• Field adjustable span point calibration (i.e. gain)

DPT-R8 series devices are commonly used in HVAC/R systems for:

• Fan, blower and filter monitoring
• Pressure and flow monitoring
• Valve and damper control
• Pressure monitoring in cleanrooms

Request
Callback

Additional Information:

• Delivery Time: Ready stock
• Packaging Details: Box packing

Product Details:

Electronic differential pressure switch and transmitter

The DPI series electronic pressure measuring devices are engineered for building automation in HVAC/R industry. The most technologically advanced and versatile electronic differential pressure switches on the market, combining up to two relay outputs and 0-10 V output options.

 

The DPI includes the following field selectable features:

• Configurable switching point: Open on rise or fall in pressure hysteresis of setpoint
• Measurement units (Pa, kPa, mmWC, inWC, mbar)
• Measurement range (4 ranges per model)
• Output signal (0-10 V, NO/NC)
• Span and zero point calibration

Request
Callback

Additional Information:

• Item Code: DPI
• Delivery Time: 3-4 working weeks
• Packaging Details: Box packing

Product Details:

DPT-Ctrl is a multifunctional PID controller with differential pressure or air flow transmitter.

DPT-Ctrl enables to control constant pressure or flow of fans, VAV systems or dampers. Its two lined display shows the direction of the control output and the measurement value at the same time. It is possible to select either current or voltage for both the control output and the differential pressure or flow output. The optional autozero function eliminates the need for periodic manual zero point calibration.

 

DPT-Ctrl series devices include:

• Control differential pressure or air flow in duct or across centrifugal fans
• All parameters (PID) are adjustable via menu
• Differential pressure or air flow transmitter (selectable via menu)
• Measure and monitor differential pressure or air flow in duct oracross centrifugal fans

 

Multiple field selectable measurement units:

• Volume flow: m3/s, m3/h, cfm, l/s
• Velocity: m/s, ft/min
• Pressure: Pa, inWC, mmWC, kPa, mbar, psi

 

Unique proportional output options:

• Control output: Voltage (0–10 V) or current (4–20 mA)
• Differential pressure or air flow: Voltage (0–10 V) or current (4–20 mA)

 

DPT-Ctrl series device options offer:

• AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy

Request
Callback

Additional Information:

• Item Code: DPT-CTRL
• Delivery Time: 3-4 weeks
• Packaging Details: Box packing

Product Details:

Multifunctional differential pressure transmitters with air flow measurement and Modbus communication DPT-MOD is a multifunctional transmitter for measuring volume flow, velocity, and static and differential pressure. The measurements can be read and the configuration done via Modbus communication. DPT-MOD requires less wiring than the traditional 3-wire transmitters because multiple devices can be connected on serial line. DPT-MOD can also be used with several different measurement probes such as FloXact™ or pitot tube, and air dampers.

DPT-MOD series devices include:

• Two selectable functions:
•  Measure and monitor in-duct volume flow, velocity or differential pressure
• Measure and monitor air flow across centrifugal fans

Multiple selectable measurement units:

• Volume flow: m3/s, m3/h, cfm, l/s
• Velocity: m/s, ft/min
• Pressure: Pa, inWC, mmWC, kPa, mbar
• Modbus communication protocol

 DPT-MOD series device options offer:

• AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy

Product Details:

DPT-Priima is a high accuracy differential pressure transmitter designed for cleanrooms and other high accuracy applications. DPT-Priima has a new, extremely accurate sensor, optional span point calibration and automatic zero point calibration.

Product Details:

Field adjustable, multi-range differential pressure transmitter with two pressure sensors for air. DPT-Dual series differential pressure transmitters are engineered for building automation in the HVAC/R industry. DPT-Dual is a technologically advanced transmitter measuring static and differential pressure from two different points, with field selectable units, range and output, all in a single device.

 

DPT-Dual series devices include:

• Multiple measurement units, field selectable via jumper, including: inWC, mmWC, Pa, mbar.
• 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper.

Product Details:

Differential pressure transmitter with scalable measuring range and a high level of overpressure protection

Special Features:
 

• High level of accuracy and long-term stability through automatic zero-point calibration
• Measurement of differential pressure or volumetric flow / flow rate possible
• Easy configuration of the measuring range, analog output, time constants and units via PC or keyboard (optional)
• USB interface (optional)
• Display with keyboard for configuration of the pressure transmitter (optional)
• Multilingual menu (English/German/Italian/French)
• Suitable for top-hat rail mounting and wall surface installation
• 2 floating switching relays (optional)
• Integrated power adapter for 115/230 VAC power supply
• Silicon-free materials for parts in contact with medium
• Output signal can be configured 0-10 V, 0/4-20 mA or ± 5 V
• Selectable attenuation of the output signal from 0-60 s
• Can be calibrated
• Highly stable measurements thanks to cyclical self-calibration of the zero point
• High level of overpressure protection even in the smallest measuring ranges

Optional:

• Contact points with adjustable switching outputs
• Set the zero-point via an external interface
• USB interface 
• Air meter function 

Other Details:

• The P 26 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows.

• The measuring range is scalable in the range from 10-100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. This can also be performed using a keyboard and display (optional). The measured values can be displayed in all standard units. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 26 can be mounted either on a wall or on top-hat rails.

• The instrument is available with an ISO factory calibration or DAkkS-accredited calibration certificate (optional).

Request
Callback

Additional Information:

• Delivery Time: 4-5 working weeks
• Packaging Details: Box packing

Product Details:

Differential pressure transmitter with two-wire technology (cable-safer) for measurement of positive or negative differential pressures.

Special features:

• High level of accuracy and long-term stability
• Little zero point drift or hysteresis; largely independent of temperature
• Measurement of positive and negative differential pressures
• LCD display (optional)
• Output signal 4-20 mA
• Factory-adjusted attenuation of the output signal of up to 5 s possible (optional)
• Can be calibrated

Applications: 
Monitoring of gaseous, non-combustible and non-aggressive Media. Possible usage areas are: 

• Building automation and air conditioning systems
• Pharma machine application for differential pressure & Air flow measurement 
• Sterilization, Depyrogenation Tunnel & Isolator applications
• This differential pressure transmitter reduces wiring costs thanks to its two-wire technology. An optional display allows measurement values to be read directly on-site in Pa, kPa or mmH₂O. An optional time constant (up to 5s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. 
• The instrument is available with an ISO factory calibration or DAkkS-accredited calibration certificate (optional).

Request
Callback

Additional Information:

• Delivery Time: 4-6 working week

Product Details:

Differential pressure transmitter available in a range of precision classes for measurement of positive or negative differential pressures.

Special features:

• Measurement ranges: 0-10 mbar, 0-25 mbar
• High level of accuracy
• Little zero point drift or hysteresis; largely independent of temperature
• LCD display (optional)
• Output signal: 0-10 V (PU),  0/4-20 mA (PI)
• Factory-adjusted attenuation of the output signal of up to 5 s possible (optional)
• Can be calibrated

Applications: Monitoring of gaseous, non-combustible and non-aggressive Media. Possible usage areas are: 

• Building automation and air conditioning systems 
• Pharma machines - low pressure measurement
• Textile machine application - Carding, Draframe, Ringframe, Blowroom

Request
Callback

Additional Information:

• Item Code: PU
• Delivery Time: Ready stock
• Packaging Details: Box packing

Product Details:

Differential pressure transmitter in control panel housing with two limit contacts.

Special features:

• Accurate measurement of differential pressure with automatic zero-point calibration and high overload protection
• Switching outputs can be used as 2-point regulator (pressure switch), for activating / deactivating a final control element (e.g. pump), with relay hysteresis
• Switching outputs can be used as a 3-point regulator  (e.g. ON 1 - OFF - ON 2) for activating / deactivating two final control elements, (e.g. air intake / outflow fans), with relay hysteresis
• Asymmetry also possible, e.g. 10-40 mbar
• High level of accuracy and long-term stability
• Very little hysteresis; largely independent of temperature
• 4 1/2 digit LED display
• Output signal 0-10 V, +- 5 V or 0/4-20 mA
• Selectable attenuation of the output signal up to 10 s
• Choice of transistor or relay outputs as limit contacts
• Can be calibrated

Request
Callback

Additional Information:

• Delivery Time: 4-6 working weeks
• Packaging Details: Box packing

Product Details:

Features:

• Excellent Linearity & Long Term Stability
• Rugged & Reliable under most conditions
• Protection of Reversed Circuit
• SS Body Construction
• Explosion Proof (Optional)

Applications:

• Food & Beverage Industry
• Water Treatment
• Chemical Industry

Product Details:

The differential pressure transmitters of the 984 series are used to measure differential pressure, overpressure and vacuum. They provide up to 8 pressure ranges and 2 output signals, which are easily selectable by jumper or rotary selector switch.

For an optimum adaptation to the application, the transmitter can be switched between various pressure ranges. The factory setting is the most sensitive range. For the series 984M and 984A the less sensitive second range will be selected by simply removing a jumper. For the series 984Q the available eight ranges can be selected by a rotary selector switch.

• Applications: Monitoring of gaseous, non-combustible and non-aggressive media. Possible usage areas are:

• BMS and HVAC systems 
• Inside Pressure Measuring on Industrial Boilers, Furnaces and Dryers
• Bag-filter pressure monitoring
• Furnace draft pressure monitoring
• Building automation, air conditioning and clean room technology
• Valve and flap control
• Filter, fan and blower monitoring 

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Packed in Box

Product Details:

Adjustable differential pressure switch for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases.

The switching pressure can be adjusted without a pressure gauge using a scaled adjustment knob. Various versions with overlapping adjustment ranges between 0.2 mbar and 50 mbar are available for this purpose. As standard, the pressure switch is equipped with a transparent cover of protection class IP54.

Application:

 

• Monitoring air filters and ventilators
• Monitoring industrial cooling-air circuits
• Overheating protection for fan heaters
• Monitoring flows in ventilation ducts
• Controlling air and fire-protection flaps
• Frost protection for heat exchangers Ex zones 1, 2 and 21, 22 with ATEX type examination

Additional Information:

• Production Capacity: Ready Stock
• Delivery Time: readily avilable
• Packaging Details: Box packed

Product Details:

Adjustable differential pressure switch for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases.

The switching pressure can be adjusted without a pressure gauge using a scaled adjustment knob. Various versions with overlapping adjustment ranges between 0.2 mbar and 50 mbar are available for this purpose. As standard, the pressure switch is equipped with a transparent cover of protection class IP54.

Application:

• Monitoring air filters and ventilators
• Monitoring industrial cooling-air circuits
• Overheating protection for fan heaters
• Monitoring flows in ventilation ducts
• Controlling air and fire-protection flaps
• Frost protection for heat exchangers Ex zones 1, 2 and 21, 22 with ATEX type examination

Setting Range:

• Temperature range:
  Medium and ambient temperature from -20°C to +85°C
  Storage temperature from -40°C to +85°C
• Diaphragm material:
  Silicone, tempered at 200°C free of gas emissions (other materials on request).
• Pressure connection:
  2 plastic pipe connection pieces (P1 and P2), external diameter 6.0 mm.
• Electrical rating:
  24 VDC/100 mA
  30 VDC/60 mA
• Electrical connection:
  AMP flat plug, 6.3 mm x 0.8 mm, in accordance with DIN 46244 or push-on screw terminals.
• Protection class:
  IP 54 with cover
• Arrangement of contacts:

Product Details:

Differential pressure switch 930 adjustable from 20 to 5000 Pascal

Adjustable differential pressure switch for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases.

The switching pressure can be adjusted without a pressure gauge using a scaled adjustment knob. Various versions with overlapping adjustment ranges between 0.2 mbar and 50 mbar are available for this purpose. As standard, the pressure switch is equipped with a transparent cover of protection class IP54.

NEW: This series is also available with an ATEX type examination.

Application:

• Monitoring air filters and ventilators
• Monitoring industrial cooling-air circuits
• Overheating protection for fan heaters
• Monitoring flows in ventilation ducts
• Controlling air and fire-protection flaps
• Frost protection for heat exchangers

Setting Range:
 

• Temperature range:
  Medium and ambient temperature from 20°C to +85°C
  Storage temperature from 40°C to +85°C
• Diaphragm material:
  Silicone, free of gas emissions.
• Pressure connection:
  2 plastic pipe connection pieces (P1 and P2), external diameter 6.0 mm.
• Electrical rating:
  Standard version: max. 1,5 A (0,4 A) / 250 VAC
  Low voltage version: max.0,1A / 24VDC.
• Electrical connection:
  Tab terminals 6.3×0.8 mm in accordance with DIN 46244 or push-on screw terminals.
  Cable conduit with cable strain relief.
• Protection class:
  IP 54 with cover
  IP 65 with cover 

Request
Callback

Additional Information:

• Item Code: 930.8x
• Delivery Time: Ready stock
• Packaging Details: Box packing

Product Details:

Analogue pressure transmitter monitoring overpressure, vacuum or differential pressure of liquid and gaseous also aggressive media. The pressure measurement is carried out in difference to the atmospheric pressure (relative pressure).

Application: 

• Level monitorning - water
• Draft pressure - Boiler, Furnace, blower etc.
• Steam pressure measurement

Request
Callback

Additional Information:

• Item Code: 981
• Delivery Time: 4-5 working weeks
• Packaging Details: Box packing

Product Details:

Datasheet: The Flow meter clamps onto a pipe, with two Flow sensing probes projecting into the pipes through 5mm. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each Flow meters is made and calibrated for a specific size of pipe, the display indicates Fow directly, with no setup or adjustments. The meter measures Flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the Flow on the basis of pipe area. The Flow rate in scfm is shown on a larger 4 digit display 485 output and pulse output permit remote display, totalizing and data collection. 

Specifications

Accuracy:2 percent of reading plus one percent of full scale at air temperatures between 4 and 50 Degree Celsius

Fluids:Compressed air and Nitrogen Gas

Operating Pressure:200 psig maximum

Input Power:200mA at 18 to 24VDC

Ring Material:Aluminum

Display:Four-digit LED display

Data Options :1.RS 485 Interface and software kit, 2.Pulse output without Display, 3. Optional Windows TAB local Display with sofware 

Product Details:

Product Details:

Adjustable pressure switch monitoring overpressure, vacuum or differential pressure of liquid and gaseous – also aggressive – media. The pressure switch uses a scaled adjustment knob to enable the adjustment of trip and reset pressure without the use of a screwdriver. Mounting in any position, to be specified for settings below 100 mbar.

Application:

• Wastewater technology
• Liquid level measurement
• Pump control
• Medical technology
• Gas pressure measurement

Request
Callback

Additional Information:

• Delivery Time: 3-4 working weeks
• Packaging Details: 45 / Box

Additional Information:

• Delivery Time: 4 to 5 working days

Product Details:

Adjustable pressure switch for monitoring the over pressure of combustible gases of the gas families.
1. City gas
2. Natural gas
3. LPG2

The pressure switch uses a scaled adjustment knob to enable the adjustment of trip and reset pressure without the use of a screwdriver.
as per standard EN1854:2010.
LPG and Neutral Gas Distribution System and burner manufacturer.

Pressure ranges:


Conformity:

• EU Gas Appliances Regulation according to EN 1854
• EU Low Voltage Directive
• EU RoHS Directive

Request
Callback

Additional Information:

• Delivery Time: 3-4 working weeks
• Packaging Details: Box packing

Product Details:

Mv: 0 to 10mv, +/-100mv Acc: 0. 25% Fs ±1 Digit Sampling Rate: 8 Times/Seconds Alarm: 2 X 3 a /230 Vac Auxiliary Power Supply: Dcv 12/24 /30 Ma Power Supply: 90 to 260 Vac Dimension: 48 X 96 Mm