GAS Detector

Product Details:

LPG detectors (propane + butane)

LPG is an explosive hydrocarbon gas consisting of butane and propane. It is heavier than air and sinks to the floor in case of leakage. Therefore, the gas detector should be placed 15-25cm above the floor and within 1-2m horizontally within the range of possible gas leakage. REAL SAFE gas detectors respond audibly and visually before the leakage reaches 20% LEL. Detectors have microprocessor-based design.

Natural gas detectors (methane)

Methane is an explosive hydrocarbon gas. It is lighter than air and rises to the ceiling in case of leakage. Therefore, the gas detector should be placed 5-15cm below the ceiling and within 1-2m horizontally within the range of possible gas leakage. Real safe gas detectors respond audibly and visually before the leakage reaches 20% LEL (Lowest Explosion Level). Detectors have microprocessor-based design

 

Optional Function : Gas shut off valve/relay output for exhaust fan, Input to Central Security System

Additional Information:

• Item Code: JKD-808
• Delivery Time: ONE WEEK

Product Details:

Features:

Microprocessor Control with advanced digital signal processing

Multi-color visual display

High-median-Low leak sensitivity selector

Low battery indication

Semiconductor gas sensor

Detection of mixture 5% Hydrogen (H2) + 95% Nitrogen(N)

Carrying case included

15.5” (40 CM) flexible stainless probe

Reference Leak source included

Ambient concentration reset

Long-life, DC brushless fan

Automatic zero and background compensation

Specifications:
Detectable Gases

Mixture 5% Hydrogen (H2) + 95% Nitrogen(N).Alarm Method

Buzzer, Tricolor LED Bar Indicator.Power Usage4 AA size (6V DC) Alkaline Batteries

Operating Temp. & Humidity40 cm ( 15.5” )Sensitivity: Less than 5 ppmHML95%N2,5%H22g / year15g / year30g / year

Snake Tube length40 cm ( 15.5” )Auto power OFF10 Minutes

Disable Auto Power Off

Press and Hold “Hi” button then power on the meter

Warm-Up Time

Approximately 45 seconds

Dimension / Weight173 x 66 x 56 x mm ( Approximately)A

pprovalsEN35422 & EN14624

AccessoriesAlkaline Batteries ( AA) x 4 pieces, User Manual, Carry Case

Additional Information:

• Item Code: C-384

Product Details:

Product Details:

Technical Specifications:

• Detection Principle: Catalytic combustion, Semiconductor, Electrochemical Cell, Galvanic Cell & Infrared
• Power Input: DC 12-24VDC
• Response Time: Less 5 Seconds
• Zero Drift: 0.2% Fs
• Accuracy: 2% Fs
• Operating Tem.: ( 0 to +50 )
• Terminations: PCB Mounted terminal blocks to accept 1.5mm wires
• Display: LCD Display L-Alarm , H-High Alarm
• Output: Two Number Relay contact
• Power Consumption: 2 wire: 0.5 W max. / 3 wire:3.6 W max
• Max Load: 600 Ohms
• Standard: UL1484 and EN50194

Additional Information:

• Item Code: RSPIG
• Delivery Time: ONE WEEK

Product Details:

LPG gas detector

Real safe it lpg gas dectector with led display
operated by 24 vdc with alarm out put realy
explosion proof industrial grade transmitter
board detector head is suitable to mount on
flame proof,weather proff junction box is
suitable to grade iia iib
approved by cmri----make zenstar

Single control panel to supply 24 vdc to
lpg gas detector and connect with relay output
and hooter-- power supply 230 vac
to be fixed at out side

Product Details:

Refrigerant Leakage Detectors    
Model: C 382       

Features:            
Multi Color Visual Display    
High-Low Leak Sensitivity Selector
Low Battery Indication    
Semiconductor Gas Sensor    
Detection of R-134A, R410A, R-407C..Freon Gas
15.5” flexible SS Probe    
Reference Leak Source Included
Ambient Concentration Reset    
Long Life, DC Brushless Fan   

Specifications        
Alarm Method: Buzzer, Tricolor LED bar Indicator
Power Usage: 4 AA size (6V DC) Alkaline Batteries
Snake Tube length: 40cm ( 15.5” )
Dimension: 173 x 66 x 56 mm    
Auto power Off: 10 minutes

Additional Information:

• Item Code: C382

Product Details:

Features:

• Simple and automated operation
• Ultra-modern sensor technology
• Designed for harsh environment

Other Details:

• Measuring Gases: Flammable gases and vapors.(N.G, LPG & Condensate)
• The central controller. Hart digital signal: Present
• Classifications: Class I, Div. I, Group A, B, C & D, ATEX II, 2GD, EEx d IIC

Following is a list of common gases that are detected by this detector:

• Alkanes or saturated hydrocarbons such as methane, Ethane, Propane, Butane, Pentane, Hexane, and Heptane, etc
• Cycloalkanes such as Cyclopropane, Cyclohexane, Methylcyclohexane
• Alkenes or unsaturated Hydrocarbons such as Ethylene, Propylene, Butene, Pentene, Hexene, Octene, etc Acetylene gas absorption at 3.1 microns which is not detectable
• Cycloalkenes such as Cyclohexene and Pinene
• Aromatics such as Benzene, Toluene, and Xylene
• Alcohols such as Methanol, Ethanol, Propanol, and Allyl alcohol
• Amines such as Dimethyl Amine, Trimethyl, Amine, Butanamine, Cyclopropanamine, and pyridines
• Ethers such as Dimethyl Ether, Ethyl Ether,N-Propyl, Ether, Methyl Vinyl Ether, Vinyl Ether, Ethylene Oxide, tetrahydrofuran, Furan, and 1,4-Dioxane
• Ketones such as Acetone, Methyl Ethyl Ketone, Pentanone, Methyl iso Butyl ketone and Heptanone
• Aldehydes that have a central wavelength mostly at the 3.55 micron region and generally have a weak detection signal at 3.4 microns. Carbon dioxide at 4.3 microns and carbon monoxide at 4.6 microns have very little interference by other gases

Technical Specifications:

• Detection Principle: Galvanic Cell & Infrared
• Accuracy: ± 2% FSD
• Repeatability: ± 2% at 50% 5. Linearity: ± 5% FSD
• Pressure Coefficient: 1 % of reading per kPa Accuracy: 2% Fs
• Operating Tem.: ( 0??? to +50???)
• Terminations: PCB Mounted terminal blocks to accept 1.5mm wires
• Display: LCD Display L-Alarm , H-High Alarm
• Output: Two Number Relay contact
• Power Consumption: 2 wire: 0.5 W max./3 wire: 3.6 W max
• Max Load: 600 Ohms
• Standard: IP 66/67, ATEX/UL Approved

Additional Information:

• Item Code: trace
• Delivery Time: ONE WEEK

Product Details:

Features:

• High adaptability to the ambient
• Robust construction
• Optimum quality

Other Details:

• The standard system consist of a compact electronic module housed in a explosion proof and weatherproof aluminum die cast with an application specific sensor
• The gas sensor give 4-20 ma output & relay output with % of LEL LCD dis-play gas sensor can interface directly with any receiving instrument starting from indicators, controllers to large control system
• The standard system consist of a compact electronic module housed in weatherproof enclosure with an application specific sensor
• This state of art transmitter is carefully designed with and manufactured with industrial grade components for reliability accuracy and long life
• Gas sensor enclosure is suitable for the ip67 certified

Technical Specifications:

• Detection Principle: Catalytic Combustion, Semiconductor
• Power Input: Dc 12-24Vdc
• Response Time: Less 5 Second
• Zero Drift: 0. 2% F
• Accuracy: 2% F
• Operating Tem: ( 0°C To +50°C ) Terminations: Pcb Mounted Terminal Blocks To Accept
• 1.5mm Wire
• Display: Lcd Display
• L-Alarm, H-High Alarm
• Output: Two Number Relay Contact
• Power Consumption: 2
• Wire: 0.5 W Max./3 Wire: 3.6 W Max
• Max Load: 600 Ohm
• Standard: Ul1484 And En50194

Additional Information:

• Item Code: NATURALGAS
• Delivery Time: FOUR DAYS

Product Details:

Additional Information:

• Item Code: SPD201
• Delivery Time: THREE DAYS

Product Details:

Carbon Monoxide Meter detects the presence of Carbon Monoxide (CO) and measures concentrations between 1~1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like the clicking of a Geiger counter: Above 200 PPM, the PPm the beeper sounds continuously with the concentration of CO. From Pinto 200 PPM. the beeper sounds discountinuously with the concentration of CO.

Specifications:

• Measuring Range 0 to 1000 ppm
• Resolution 1 ppm
• Accuracy ± 5%
• Warm Up Time £ 2 Sec.
• Sensor Type Electrochemical
• Operating Temp. 0 to 50 °C
• Dimension 160 X 56 X 40 mm
• Weight 180 g

Product Details:

Siro-CO2 is a carbon dioxide transmitter with a modern design and new hardware, including sensors.

• The transmitter combines CO2 concentration, temperature and optional relative humidity and VOC measurements into one easy-to-use device. 
• It offers easy installation and adjustment, several different model options and various output signals that are configurable separately for each measurement parameter. 
• Siro-CO2 utilizes the industry standard NDIR measurement principle with self-calibrating ABC logic™ for CO2 measurement. 

Additional Information:

• Production Capacity: Readily Available
• Delivery Time: 3 to 4 weeks
• Packaging Details: Box packing

Product Details:

CDT series air quality transmitters are engineered for building automation systems in the HVAC/R industry. The CDT series measures carbon dioxide (CO2) utilizing the industry standard NDIR measurement principle, and temperature (T). Optional relative humidity (rH) measurement is also available in the same device. CDT series devices are available with large touchscreen display making configuration of the device quick and easy.

The CDT2000 series transmitters calibrate themselves automatically using ABC logicTM. The ABC logicTM requires that the space in which the transmitter is used needs to to be unoccupied for four hours per day so that the indoor CO2 concentration drops to the outside level. CDT2000-DC is a dual channel model with a measuring channel and a reference channel that makes a continuous comparison and the necessary adjustment accordingly. CDT2000-DC is also suitable for buildings that are continuously occupied.

CDT series devices include:
• Separate field configurable output for each measurement parameter (CO2, rH, T)
• Proportional output options including: voltage (0–10 V, 2–10 V) and current (4–20 mA)
• Offset feature enabling field calibration for each measurement parameter (CO2, rH, T)CDT2000 series device options offer:
• 2” x 3” touchscreen display
• Field configurable relay for any of the three parameters
• Modbus configuration

Applications:

• CDT series devices are commonly used to monitor:
• CO2 and humidity levels in offices, public spaces, meeting rooms and classrooms
• CO2 levels of return air in ventilation systems
• Incoming air and return air humidity levels in ventilation system
• Humidity in various industrial applications
• Temperatures in HVAC/R environment
• CDT2000-DC series devices can also be used in applicationswhere there is a constant source of carbon dioxide present (forexample hospitals and greenhouses)